Valley Alarm has been installing access control in Los Angeles since 1981. Card readers, video intercoms, gate entry systems, and the panels behind them are wired and programmed by our own trained technicians. We install Brivo, DSX, ZKTeco, Comelit, and Rosslare. The platform gets picked to fit the building, not the other way around.
Technology Partners
Apartment and Intercom Installation in Los Angeles
Intercom installation is where most apartment and HOA projects start. The Comelit panel in this photo is at a gated commercial entry we wired here in Los Angeles. A resident sees who's at the gate and releases it from a monitor or from their phone. One directory listing covers up to fifteen devices, so the whole household rings. Residents can also send a virtual key. A QR code or six-digit PIN works for a set day and hour, then expires. That covers the dog walker, the contractor, and every delivery driver, not just the one carrier with its own lockbox.
Cloud-Based Access Control Installation
Cloud-based access control means you manage doors from a browser rather than from a laptop in a closet. This is a Brivo panel and its power supply, installed and terminated at a commercial building in Los Angeles. Ask the dashboard for every failed access attempt this week, in plain language, and it filters to those. Expire a contractor's credential on a set date. Turn a suspicious entry into an incident record, and the video comes attached to it.
Restrict sensitive areas to the people who need them
Expire a contractor's credential on a set date, automatically
Stop paying to re-key every time someone leaves
See who opened which door, and when
Pull the video attached to a door event
Integrate with intrusion alarms and cameras
Manage several Los Angeles sites from one dashboard
Commercial Access Control Installation
Commercial access control installation in Los Angeles comes down to two questions: which doors and which credential. The reader in this photo is an Armatura proximity reader at an interior office door. It reads cards and fobs. On the same panel, you can mix in a keypad, a mobile credential, or a fingerprint reader. We run the wire, mount the reader, tie it back to the panel, and program the schedules.
Gate and Vehicle Entry Access Control Installation
Gate access control installation in Los Angeles has one problem a door doesn't: the driver stays in the car. A pedestal puts the reader where the hand is. Sometimes that's a drive lane. Sometimes it's a glass storefront with nowhere to mount, like the entry in this photo. On a Brivo system, the car itself can be the credential. License plate recognition reads the plate and opens the gate for vehicles you've enrolled. Windshield tags, fobs, and a call-in intercom all work the same gate.
Industrial and Warehouse Access Control Installation
Industrial access control installation in Los Angeles is judged on the conduit as much as the software. These are DSX panels on a block wall, hard-piped, at a facility in the city. Warehouses and plants need more doors than an office, plus roll-up doors, dock entries, and yard gates. A hardwired multi-door controller carries that without putting door traffic on the building's Wi-Fi. There's more in warehouse access control in Los Angeles.
40+
Years In Business
46
Ranked on the SDM 100
#1
Loved by Customers
100+
Local staff employed
Access Control Repair and System Takeover in Los Angeles
Not every access control job in Los Angeles starts from scratch. Plenty of buildings already have a panel on the wall from an installer who stopped answering the phone. We take over existing DSX, Brivo, ZKTeco, Kantech, and Rosslare systems and get them back under support. We can also add doors to what's already there. If a panel is too far gone to keep, we'll say so instead of selling around it.
Why Los Angeles Businesses Pick Valley Alarm
Valley Alarm is family-owned and has been installing security systems in Los Angeles since 1981. That's 45 years, same business, same city. We're not a single-line dealer. Brivo, DSX, ZKTeco, Comelit, Rosslare, and Kantech all get installed and serviced by our own technicians. The recommendation depends on your building, not on what we're contracted to move. Monitoring runs around the clock from our monitoring center in Orange County, with a fully redundant facility in Texas. See more about Valley Alarm in Los Angeles.
Complete Security Solutions for Los Angeles
Valley Alarm provides a complete line of Intrusion Detection, CCTV, Access Control, and Integrated Security Solutions for commercial and residential clients.
The Need for Access Control Installation In Los Angeles
Los Angeles businesses lose more to former employees, former tenants, and former contractors than to anyone breaking in. Every key handed out is a key that never really comes back. You can't prove a returned key wasn't copied first. And you can't tell which master-key holder opened the stockroom at 2 AM. Re-keying the building answers neither question. It just resets the same problem at your expense.
Access control fixes what a lock can't. A credential can be switched off in seconds from anywhere. The door records who opened it and when, so a dispute becomes a log entry rather than an argument. Shared parking structures, multi-tenant floors, and buildings with three street entrances all operate on a single system. Contractors receive credentials that expire automatically when the job ends. For any property with steady turnover, the difference shows up the first week somebody leaves.
