Electric alarm systems are over 100 years old, one of the earliest being patented by Alexander Pope of Boston. His system was very similar to modern alarms, consisting of magnetic contacts placed at the openings and interconnected by pairs of wires to a battery and a bell. The disturbance of any of the openings closed the circuit and caused the bell to ring. This system was, of course, much simpler than modern alarms and its main disadvantage was that it could be defeated by cutting the wire.

Basic Principles of Alarm Systems

There are two basic “levels of protection” provided by a security system: exterior (or perimeter) protection and interior protection. The ideal security system uses a combination of both types.

Perimeter Protection

Exterior or perimeter protective devices generally consist of sensing mechanisms attached to doors and windows leading into the home. These devices are wired in such a way that they will sound the alarm if an entry is attempted and send an emergency call for help to a central monitoring center. Magnetic contacts are the most widely used for perimeter protection. These devices work with a switching mechanism. The contacts are attached to doors or windows and, when these protected areas are opened the magnet moves away from the switch and the alarm is activated. In the event that an intruder attempts to bypass the magnet contacts by breaking the glass in a door or window, specially developed sensors can detect the sound of glass breaking and activate the alarm.

Interior Protection

It is important to have a method for detecting an intruder should he elude the perimeter security system. This is where an interior system comes into play. One of the more commonly used interior protective devices are motion detectors. There are three basis types: infrared, microwave and ultrasonic. These protect the interior by detecting the body heat or movement of an intruder and sounding the alarm.

Fire Protection Systems

Both smoke and heat detectors should be included in any security system for fire prevention and life safety. Like the security system, a fire prevention system will not only make your protection complete, but also reduce your homeowner’s insurance premiums. Smoke detectors should be located in each bedroom, outside all sleeping areas and on all levels of the home. They work by detecting the presence of smoke particles in the air.

Have more questions? Contact us here at Valley Alarm. We’ll be happy to answer them for you!

3 thoughts on “How An Alarm System Works – Explained”

  1. For sure man I will. I have some videos petsod of it working too so you can judge by that as well. I know they are really good alarms though. I would have gotten a Viper for my last alarm but I was 100 dollars short when I got my other one when I saw the viper so I kinda had no choice.

  2. Thanks for the sensible critique. Me & my neighbour were preparing to do a little analysis about that. We acquired a good e-book on that matter from our local library and most books where not as influensive as your information. I am very glad to see such data which I was searching for a long time.This made very glad! Anyway, in my language, there aren’t much good supply like this.

Leave a Reply

Your email address will not be published. Required fields are marked *


By submitting this form, you are consenting to receive marketing emails from: Valley Alarm, 8111 San Fernando Rd, Sun Valley, CA, 91352, http://www.valleyalarm.com. You can revoke your consent to receive emails at any time by using the SafeUnsubscribe® link, found at the bottom of every email. Emails are serviced by Constant Contact